Sony Handycam DCR-VX1000 Operation Manual page 44

Adjusting the White Balance
Locking the white balance setting (One-push white balance mode)
When you set the white balance to one-push white balance mode, the setting is locked and maintained
even if lighting conditions change, and saved for one hour after power sources such as the battery are
detached if the lithium battery is inserted. You can achieve recording with natural colors without
being affected by ambient light.
(1) Set HOLD/AUTO LOCK selector to the center (auto lock release) position.
(2) Press WHT BAL twice to display ∑ in the viewfinder.
(3) Shoot a white object such as paper fully in the viewfinder.
(4) Press ∑.
The ∑ indicator flashes rapidly. When the white balance has been adjusted and stored in the memory,
the indicator stops flashing.
2
WHT BAL
1
HOLD
4
44