Sony Handycam DCR-VX1000 Operation Manual page 24

Fader and Overlap
When using Overlap
(1) Slide OPEN and open the battery cover.
(2) Set DIGITAL MODE on the rear of battery cover to OVERLAP.
(3) Press FADER/OVERLAP repeatedly until "OVERLAP" appears in the viewfinder.
The stored last scene overlaps the scene being shot.
(4) Press START/STOP to start recording.
The scene being shot gradually fades in over the still picture of the last recorded scene.
2
OVERLAP
3
To Cancel the Fade-in/Fade-out Function
Before pressing START/STOP, press FADER/OVERLAP until the fade indicator disappears.
To use the fading function repeatedly
Start from step 1 each time.
Notes on the fading and overlap function
You cannot fade in, fade out, or use the overlap function while you record with interval recording, cut
recording or photo recording.
The last scene for overlap is stored only when you record and press START/STOP again (recording
standby/pause mode) before using overlap. In other cases, this camcorder starts Rec Review automatically
to store the picture on the tape before it overlaps the scene being shot.
24
DIGITAL MODE
ZOOM
FADER
OVERLAP
STBY
OVERLAP
1
REC
4
START/
STOP
LOCK
STANDBY
PHOTO STANDBY