Sony Handycam DCR-VX1000 Operation Manual page 22

Changing the Mode Settings
Items in VTR Mode only
A MIX BAL
• Select this item and change the level of the indicator by pressing > or . to adjust the volume balance
between audio mode ST1 and ST2.
SEARCH <C MEMORY/OFF>
• Normally select C MEMORY to activate cassette memory search function.
• Select OFF otherwise. In this case, the recorded picture is searched without cassette memory
function.
When DIGITAL MODE is set to OVERLAP
You cannot set D ZOOM to ON. Once you set DIGITAL MODE to OVERLAP, D ZOOM settings are changed
to OFF automatically.
About FRAME REC and INT REC setting
Both settings are automatically set to off when:
Power switch is set to OFF or VTR.
Power source is disconnected.
PHOTO button is pressed.
Other settings retains as long as lithium battery is installed even if power source is disconnected.
22