Switching On/Off - Blaupunkt Malibu C50 Operating Instructions Manual

There are various ways of switching the
unit on/off.
Switching on/off using the vehicle
ignition.
If the unit is correctly connected to the
vehicle's ignition, it will switch on/off si-
multaneously with the ignition.
You can also switch the unit on even if
the ignition is off.
To do so, press button 3 until the
unit turns on.
Note:
To protect the vehicle battery, the unit
will switch off automatically after one
hour.
Switching on/off using the remov-
able control panel.
Remove the control panel.
The unit switches off.
Attach the control panel again.
The unit switches on. The settings (ra-
dio, cassette or CD changer) that were
set before the unit was switched off will
be reactivated.
Switching on/off using button 3.
To switch the unit on, press button
3.
To switch the unit off, press button
3 for longer than two seconds.
The unit switches off.
8
The system volume can be adjusted in
steps from 0 (off) to 66 (maximum).
To increase the system volume,
turn the volume control to the right.
To decrease the system volume,
turn the volume control to the left.
You can set the unit's default power-on
volume.
Press the MENU button 8.
button :.
Press the
"ON VOLUME" appears in the display.
Set the power-on volume using the
buttons :.
and
If you set the power-on volume to 0:
every time you turn the unit on, the pow-
er-on volume will be the same as the
volume level that was set before the unit
was last switched off.
Risk of serious injury.
If the power-on volume is set to max-
imum, the volume level can be very
high when the unit is switched on.
This can cause hearing damage.
If the volume was set to maximum
before the unit was switched off and
the power-on volume is set to 0, the
volume level can be very high when
the unit is switched on again. This
can cause hearing damage.