Radio Mode; Setting The Scantime; Cassette Playback - Blaupunkt Malibu C50 Operating Instructions Manual

"CAS SCAN" appears in the display. All
the tracks on the cassette are briefly
played in ascending order.
To stop scanning, press the OK
button ; again.
The current track will then continue to
be played.
Note:
You can set the scanning time.
For further details, read the section
on „Setting the scantime" in the
chapter entitled "Radio mode".
In order for the S-CPS, RPT and
SCAN functions to work properly,
there must be a pause of at least
three seconds between each track
on the cassette.
To switch between the playback direc-
tion and clock displays, press the
(DIS) button 7 once or several times.
button :.
Press the
"FORWARD" appears in the display.
button :.
Press the
"REWIND" appears in the display.
Press one of the
the OK button ;.
Cassette playback will then be contin-
ued.
Note:
Whilst the tape is fast winding, you can
listen to the radio station that was tuned
into last. To use this feature, you must
first activate "radiomonitor".
Playback is paused and "CAS PAUSE"
appears in the display.
You can automatically skip blank spac-
es on the tape that are longer than five
seconds. To do so, you must first acti-
vate the "blankskip" feature.
buttons : or
To pause cassette playback, press
>.
button 3
Press button 3
cancel pause.
Press the MENU button 8.
Keep pressing the
until "RM ON" or "RM OFF"
appears in the display.
Press the or
switch radiomonitor on/off.
When you have finished making
your changes, press the MENU
button 8 or OK ;.
Press the MENU button 8.
Keep pressing the
until "BLANKSKIP" appears in the
display.
> again to
button :
button : to
button :
13