Table of Contents
Advertisement
System settings
Selecting the display mode Automatic/Day/Night/Off
1.
To select the display mode, mark "Display". Press
A menu for the selection of the display mode will appear.
2.
Select the desired mode. Press
The mode selected will be activated.
Plus Point: You can also conveniently select the display mode in the "Set-
tings" menu during route guidance. For more information, refer to the section
on "Selecting the display mode Automatic/Day/Night/Off" in the chapter on
"Route guidance".
If the display has been switched off, you can press any key to switch it on again.
Selecting another source
You can also use an adapter to connect a video player or a TV receiver to the RGB
input of the TravelPilot DX-N. Please contact your authorized Blaupunkt dealer or call
the Blaupunkt hotline to find out which adapters are available.
Note:
To select the menu item "TV/Video", you have to activate "TV/Video" in the sub-menu
for the basic settings first. For more information, refer to the section on "Activating TV/
Video" in this chapter.
1.
If you want to see the TV/video picture, select "Source". Press
A menu which allows you to select the source will appear.
2.
Select the desired source. Press
The mode selected will be activated.
If "TV/Video" has been selected as the source, you can press any key on the remote
control to return to the menu for selecting the source.
.
OK
.
OK
.
OK
.
OK
48
Advertisement
Table of Contents
