Blaupunkt Denver CD147 Owner's Record page 15

Seek Tuning
Press /\ or V to seek next receivable frequency. Tuning stops at frequency that fulfills sensitivity
requirements predetermined by sensitivity set through SENS/LD button. Press of /\ or V buttons for
more than 1/2 second seeks next receivable frequency after button is released.
Tuning Sensitivity (SENS)
Press SENS/LD for more that 2 seconds to switch between lo and dx search sensitivity.
Radio Reception Hints
• When listening to weak or distant AM stations, adjusting the Treble to minimum (-7) will reduce
noise and improve sound.
• In general, set SENS to DX if in rural areas or where stations tend to be weak and distant, and to
LO when in metropolitan areas or where stations tend to be strong and local.
Stereo Symbol
Stereo symbol turns on if a stereo station with an incoming signal of 20 dB V is received. The unit
gradually switches between mono to stereo automatically.
Manual Tuning
Press << or >> and frequency will go one channel/step in direction pressed. Press and hold causes
continuous manual tuning.
Preset Station Storage
After tuning desired frequency on desired band, press and hold a Preset Button for more than 2
seconds to store current frequency. Audio is muted during storage, preset number appears, and
beep acknowledges storage. No preset storage during seek, scan or Travel Store.
Preset Station Selection
Press desired Preset Button.
Travel Store
This feature allows you to automatically store stations onto all 6 preset buttons and is especially
useful when traveling outside your normal listening area. In any FM Bank, press BND for 2 seconds
to activate FM Travel Store. (In AM Bank, press BND for 2 seconds to activate AM Travel Store.) T
STORE appears, followed by seek-type display of frequency and preset numbers. Beginning at the
bottom of the band, TS stores six strongest stations, one on each of the six preset buttons, in
decreasing order of signal strength, and returns to preset 1. Pressing any presets or BND or scan
cancels search operation. When source is changed during Travel Store, operation completes itself,
despite source change.
Station Scan Tuning
Press SCA. "STA SCAN" appears, then frequency blinks (along with preset number if appropriate)
during scanning. Unit stops at receivable stations for scan time set under Menu. Unit continuously
scans until user stops scan by pressing SCA, another tuning button, SRC, or MENU button.
Preset Scan Tuning
Press PS/SCA for more than 2 seconds. "PS SCAN" appears, then frequency and preset number
blink during scanning. Unit starts at FM1/Preset 1 (or AM/Preset 1) and proceeds through all
presets (in FM all three banks) and returns to frequency tuned prior to PS activation and stops.
Stops earlier if user presses another tuning button, SCA, SRC, or MENU button. Unit skips past
preset frequencies that do not meet minimal seek-tuning threshold.
Tuner Timer and Station Naming (See pages 20 and 21)
Compact Disc Play Operation
Once CD playback adjustment is complete, CD display sequence follows.
CD Insertion
Make sure that "CD IN" isn't lit. Insert a disc into Disc Slot with printed surface facing up. Playback
starts at beginning of first track.
15