Advertisement
A cooling stage is foreseen at the end of the drying cycle.
If your laundry load to wash and dry is in excess of the maximum load (see table below), perform the wash cycle and
when the programme is complete, divide up the garments and put part of them back in the drum. Now follow the
instructions provided for a dry only cycle. Repeat this procedure for the remainder of the load.
Table of drying times
Drying only
Turn the programme knob to one of the drying settings depending on the type of fabric, then select the desired
drying type using the drying knob. A spin cycle is carried out during the drying, if you have set a cotton programme
and a level of dryness (cupboard/hanger/iron).
Functions
To enable a function:
1. Press the button corresponding to the desired function, according to the table below.
2. The function is enabled when the corresponding indicator light is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the
programme set.
Advertisement
