Still Images - Sony Handycam DCR-DVD910 Operating Manual

Movies
1
Turn the POWER switch
the (Movie) lamp lights up.
2
Press START/STOP B (or C).
[STBY]
To stop recording, press START/STOP
again.
b Notes
• You cannot record still images on a disc.
z Tips
• See page 12 for the recordable time of movies, and page 78 for the number of recordable still images.
• You can record still images by pressing PHOTO F during movie recording (Dual Rec, p. 37).
• appears when [ INDEX SET] is set to [ON] (the default setting) during movie recording (p. 77).
• A frame is shown on the detected face, and the detected face image is sharpened automatically when
[FACE DETECTION] is set to [ON] (
• You can switch recording between movies and still images by touching
(CAMERA) t [MOVIE] or [PHOTO].
• You can create still images from recorded movies (p. 50).
A
until
t
[REC]
) (the default setting) (p. 77).

Still Images

1
Turn the POWER switch A until
the (Still) lamp lights up.
2
Press PHOTO F lightly to adjust
the focus A (a beep sounds), then
press it fully B (a shutter click
sounds).
t
Flashing
appears next to
disappears, the image has been
recorded.
(HOME) D (or E) t
Lights up
. When
35
Continued ,