Technical Data For D445; Table 4-4 Environmental Requirements; Table 4-5 Memory For System Data And The Memory Size - Siemens SIMOTION D45 Series Manual

Technical Data

4.2 Technical data for D445

Ambient conditions
Table 4-4
Parameters
Permissible ambient temperature
•
•
Permissible relative humidity
(without condensation)
Installation altitude
Organic/biological influences
•
•
•
Pollution degree
Degree of protection according to IEC 529
4.2 Technical data for D445
The following technical data are relevant for the D445.
Additional references
For information on system clocks and address ranges of the SIMOTION D445, refer to the
SIMOTION D4x5
Memory for system data
Table 4-5
Data
Diagnostic buffer
50
Environmental requirements
Storage and transport
Operation
Storage
Transport
Operation
Commissioning Manual.
Memory for system data and the memory size
Values
-40° C to +70° C
•
0 °C to +55 °C up to 2000 m above sea level
•
Starting at an altitude of 2000 m, the maximum ambient
temperature decreases by 7 °C every 1000 m
5% ... 95%
Up to 5000 m above sea level
Class 1B1 according to EN 60 721-3-1
•
Class 2B1 according to EN 60 721-3-2
•
Class 3B1 according to EN 60 721-3-3
•
2 according to EN 60 664-1
IP20
Memory size
200 messages
D4x5
Manual, 03/2007 Edition