Installation - Sony DSC-W150 Service Manual

2-4. ZOOM MOTOR REPLACING METHOD
2-4-1. Zoom Gear Block Replacing Method
Removal
1 Remove one screw.
2 Break solders.
3 Remove the Zoom Gear Block.
4 Remove the Naruto Gear.
4 Naruto Gear
2 Solders
1 Screw
3 Zoom Gear Block

Installation

1 Confirm the lens barrel is stored.
2 Confirm the direction of the Naruto Gear and install it.
1
Adjust convex part to the CCD side.
2 Naruto Gear
3 Install the Zoom Gear Block after matching the position of boss.
4 Solder the flexible board of Zoom Gear Block.
5 Tighten one screw.
* Tightening torque = 0.098 ± 0.01N • m (1.0 ± 0.1kgf • cm)
4 Solders
5 Screw
Boss
3 Zoom Gear Block
DSC-W150/W170_L2
2-8