Table of Contents
Advertisement
Table of Contents
Description ..................................................................... 2
Safety ............................................................................. 2
Purpose of this Manual .................................................. 2
Important Safety Information ..................................... 3-4
Identification ................................................................... 5
Specifications ................................................................. 5
Operation .................................................................... 6-7
Die and Connector Selection ......................................... 8
Maintenance ................................................................... 9
Illustrations and Parts Lists .................................... 10-12
Greenlee Tools, Inc.
Description
The RK425 6-ton, Single-acting, Remote Crimping Tool
is a hand-held crimping tool with removable crimping
jaws. The single-acting ram requires hydraulic pressure
to advance, and uses an internal spring to return.
This crimping tool requires an external 10,000 psi
(700 bar) hydraulic power source, such as Greenlee 975,
976-22, 980, 980-22, and EHP700. The RK425 may
also be powered using a hydraulic intensifier capable of
developing 10,000 psi (700 bar), such as the Greenlee
Dynapress
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This manual and any
markings on the tool provide information for avoiding
hazards and unsafe practices related to the use of this
tool. Observe all of the safety information provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee tool:
Keep this manual available to all personnel.
Replacement manuals are available upon request
at no charge at www.greenlee.com.
All specifications are nominal and may change as design
improvements occur. Greenlee Tools, Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
Dynapress and GATOR are registered trademarks of Greenlee Tools,
Inc.
Blackburn is a registered trademark of Thomas & Betts.
KEEP THIS MANUAL
2
RK425 Remote Crimping Tool
intensifier.
®
RK425 Remote Crimping Tool
Do not discard this product or throw away!
For recycling information, go to www.greenlee.com.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Advertisement
Table of Contents
