IBM Brocade 4 Gb SAN Switch Module Installation Manual page 28

6. Slide the switch module out of the bay and set it aside.
7. Place either another switch module or a filler module in the bay within 1 minute (see steps 9 and
11 on page 12 for more information).
8. If you placed another switch module into the bay and if you are using the external switch-
module ports, you can insert any SFP modules that you removed in step 4 on page 13 into
external Fibre Channel port 0 and Fibre Channel ports 15 through 19. For SFP-module
installation instructions, see the documentation that comes with the SFP module.
9. Use LC-LC or LC-SC fiber-optic cables to connect the switch-module external ports to external
Fibre Channel devices. For more information, see the documentation that comes with the cable
options.
10. Replace the acoustic attenuation module, if you removed it in step 2 on page 13.
14
Brocade 4 Gb SAN Switch Module: Installation Guide