Siemens Stratos Outstation Installation Manual page 27

Maintenance
The WAN connectivity can be viewed on the "Status" – "Network Connections" – "Dialup" sec-
tion. It should look similar to the screen below, with the WAN IP (set from the Mobile Net-
work) being listed and the Status being set to connected.
If the site is using the default configuration or a configuration file has been provided by the
Poole Engineering Department, no further action would be required. The next section is for
information only, and would only require configuring if the information has been specified by
the Engineering Department.
A.3 Optional Configuration Parameters
This section is for information only, and would only require configuring if the information has
been specified by the Engineering Department.
The private network (Local Area Network) may need to be configured to the given settings,
this can be done under "Network" – "LAN". If you make any changes to the form press the
"Apply" Button to save them.
IP ROUTERS INSTALLATION GUIDE 3G OTU
667/CI/45025/000 Rev 4 Unrestricted
27