Installation Of The Antenna Cable - Siemens Stratos Outstation Installation Manual
For ip router proroute h685 4g
Hide thumbs
Also See for Stratos Outstation:
Table of Contents
Advertisement
Installation and Configuration Guidance
-65
24
-63
25
-61
26
-59
27
-57
28
-55
29
-53
30
3.3. Installation of the Antenna Cable
The Cable kits (667/1/46193/150 and /300) comes with:
•
15M or 30M lengths of reinforced coaxial antenna cable (998/4/25011/400)
•
PIB Self Amalgamating Tape (992/4/07906/000)
•
Female N-Type Connector (For termination in the controller Cabinet)
•
Male N-Type Connector (For Pole Top Termination)
•
Adapter SMA plug to ReSMA socket
•
ReSMA plug to N type plug pigtail cable.
•
N-Type Cable Termination Guide (667/CI/46193/ETC)
The reader is to refer to N-Type Cable Termination Guide (667/CI/46193/ETC) for details;
1
Install the cable between the Roadside Cabinet and traffic signal pole.
2
Terminate the antenna cable using a Male N-Type connector (See Terminating N-Type
Connectors).
Safety of Cable Handling
Ensure that the bend radius is not less than 6 times the diameter of the cable at any time dur-
ing installation
Safety of Cable Handling
The antenna should be installed as a single cable with no joins, and care must be taken not to
kink the cable. Once it has been kinked, it cannot be straightened without attenuating the
signal.
IP ROUTERS INSTALLATION GUIDE 3G OTU
667/CI/45025/000 Rev 4 Unrestricted
Excellent
Excellent
Excellent
Excellent
Excellent
Excellent
Excellent
12
Advertisement
Table of Contents
