The Intelligent Detector Backplane - Siemens Stratos Outstation General, Installation, Commissioning & Maintenance Handbook

4.9

The Intelligent Detector Backplane

The Stratos Outstation can be connected to intelligent detector backplane(s) for better
integration with detectors. Each IDB can be used with up to four loop detectors and
provides a GSPI interface which removes the need to wire discrete detector outputs into
I/O board inputs and provides a mechanism for terminating the street loop wiring for 16
loops for each backplane fitted. Each IDB must be addressed in the same manner as any
GSPI I/O board as described in Section 4.8.5.
The Intelligent Detector Backplane Kit part number is 667/1/32910/950.
Whenever detectors are used a separate detector supply kit will be required unless there
is spare capacity on a detector supply that is already available within the cabinet. Four
detector supply kits are available as shown below:
Description
ST900ELV Detector Supply Kit – 2A
(-24V Rectified AC, ELV Compliant)
ST900ELV Detector Supply Kit – 6A
(-24V Rectified AC, ELV Compliant)
ST800/ST900 Detector Supply Transformer – 2A (24V AC)
ST800/ST900 Detector Supply Transformer – 6A (24V AC)
Security classification Unrestricted
Version 3
Last Editor Alan Doyle
Document Name Stratos Outstation General and ICM Handbook
Copyright © Siemens plc 2014. All Rights Reserved.
Mobility, Intelligent Traffic Systems
Sopers Lane, Poole, Dorset, BH17 7ER
Page
Status
Date
Document No.
Mobility and Logistics is a division of Siemens Plc
Part Number
667/1/33075/000
667/1/33074/000
667/1/27853/000
667/1/20292/008
51 of 92
Issued
05-Oct-2017
667/HB/52250/000