Phone Setup; Connecting The Phone - Grandstream Networks GRP2604 Quick Installation Manual

PHONE SETUP:

Slots for the
wall mount
spacers and
phone stand
Kensington Lock
PC Port
LAN Port
Installing the phone (Wall Mount *sold separately):
1. Attach the wall mount spacers to the slot for wall mount spacers on the back
of the phone.
2. Attach the phone to the wall via the wall mount hole.
3. Pull out the tab from the handset cradle (See figure below).
4. Rotate the tab and plug it back into the slot with the extension up to hold the
handset while the phone is mounted on the wall (See figure below).
Wall mount
Installing the phone (Phone Stand):
For installing the phone on the table with the phone stand, attach the phone stand
to the bottom of the phone where there is a slot for the phone stand. (Upper half,
bottom part).
Wall mount
Headset Port
Phone Stand
Handset Port
Power
Handset Rest
Tab with
extension up
Tab with
extension down
~3~
Installing BLF Paper label:
1. Handwrite or print the names on the dedicated space on the paper label.
2. Place the paper label in the groove of the phone.
3. Bend the plastic film so that the protruding points on the left and right sides
snap into the grooves to complete the installation.
4. If you want to take it out, use a nail or thin card to move the slit on one side of
the film to bend it and then take it out.

CONNECTING THE PHONE:

To setup the GRP2604/GRP2604P, follow the steps below:
1. Connect the handset and main phone case with the phone cord.
2. Connect the 5V DC output plug to the power jack on the phone; plug the pow-
er adapter into an electrical outlet. If PoE switch is used in step 3 (GRP2604P
only), this step could be skipped.
3. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a
router (LAN side of the router) using the Ethernet cable.
4. The LCD will display Grandstream logo. Before continuing, please wait for the
date/time display to show up.
5. Using the phone embedded web server or keypad configuration menu, you
can further configure the phone using either a static IP or DHCP.
Scan QR code
to watch the BLF
configuration and
installation video
Cover
Label
~4~