Sharp MX-B427PW User Manual page 22

Set up, install, and configure
Using the Push Button method
1
From the control panel, navigate to:
Settings >
Push Button Method >
2
Follow the instructions on the display.
Using the personal identification number (PIN) method
1
From the control panel, navigate to:
Settings >
Method >
2
Copy the eight‑digit WPS PIN.
3
Open a web browser, and then type the IP address of your access point in the address field.
Notes:
•
To know the IP address, see the documentation that came with your access point.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
4
Access the WPS settings. For more information, see the documentation that came with your access
point.
5
Enter the eight‑digit PIN, and then save the changes.
Connecting a mobile device to the printer
Before connecting your mobile device, make sure to do the following:
•
Enable Wi‑Fi Direct
Settings > > Network/Ports >
•
View the Wi‑Fi Direct SSID. From the control panel, navigate to:
Settings > > Network/Ports >
•
View the preshared key (PSK). From the control panel, navigate to:
Settings > > Network/Ports >
Connecting using Wi‑Fi Direct
1
From the mobile device, go to the settings menu.
2
Enable Wi‑Fi, and then tap Wi‑Fi Direct.
3
Select the printer SSID.
4
Confirm the connection on the printer control panel.
> Network/Ports >
> Network/Ports >
®
in the printer. From the control panel, navigate to:
> Wireless >
> Wireless >
> Wireless > > Enable Wi‑Fi Direct >
> Wi‑Fi Direct >
> Wi‑Fi Direct >
> Wi‑Fi Protected Setup >
> Wi‑Fi Protected Setup >
> SSID >
> Set PSK >
22
> Start
> Start PIN
> On >