Technicolor DWA0120 Setup And User Manual page 14

Broadband LED (if you are using the DSL gateway scenario)
Colour
Green
Off
Broadband LED (if you are using the local router scenario)
Colour
Green
Off
Internet LED
Colour
Green
Red
Off
Wireless LED
Colour
Green
Off
Both the 2.4 GHz and 5 GHz Wi-Fi access point have a dedicated Wireless LED.
WPS LED
Colour
Green
Orange
Red
For more information about WPS, see
DMS3-CTC-25-552 v1.0
State Description
Solid on DSL line synchronised.
Blinking Trying to detect carrier signal or pending DSL line synchronisation.
No DSL line connected.
- or -
Your DWA0120 powered off.
State Description
Solid on Connected to the WAN device.
Not connected to the WAN device.
State Description
Solid on Connected to the Internet, no activity.
Blinking Connected to the Internet, sending/receiving data.
Blinking Trying to connect to the Internet.
No Internet connection.
State Description
Solid on At least one device is connected to the Wi-Fi access point, no wireless
activity.
Blinking At least one device is connected to the Wi-Fi access point and traffic is
present.
No devices connected to the Wi-Fi access point or Wi-Fi is disabled.
State Description
Solid On Client successfully registered via WPS.
Blinking WPS registration ongoing.
Blinking Error occurred.
"3.1.1 Connecting to the Wi-Fi using WPS" on page
1 Getting started
22.
10