Technicolor DWA0120 Setup And User Manual page 79

The DWA0120 does not appear in your Wi-Fi client's access point list
• Make sure that the DWA0120's Wi-Fi is enabled.
1 Browse to the
For more information, see
2 In the Wireless card header, make sure that the switch is
• Make sure that no Wireless Control rules apply.
"3.3 Turning the Wi-Fi off/on at scheduled times" on page
• If the signal is low or not available, try to reposition the DWA0120 for optimal performance.
• Change the wireless
The DWA0120 access point is no longer available
If you were able to connect in the past, but can't connect anymore:
• Make sure that the Wi-Fi client adapter is enabled (message like "radio on").
• Make sure that the Wi-Fi client is still using the correct wireless settings (network name (SSID), security settings).
• Make sure that no Wireless Control rules apply.
"3.3 Turning the Wi-Fi off/on at scheduled times" on page
• Make sure that the DWA0120's Wi-Fi is enabled.
1 Browse to the
For more information, see
2 In the Wireless card header, make sure that the switch is
Poor Wireless Connectivity or range
Try the following:
• Check the signal strength, indicated by the Wi-Fi client manager. If the signal is low, try to reposition the DWA0120 or
Wi-Fi client for optimal performance.
• Change the wireless
• Use WPA(2) PSK as encryption.
For more information, see
Change the wireless channel
Proceed as follows:
1 Browse to the
For more information, see
2 Click Wireless. The Wireless page appears.
3 In the Channel list under Interface, click a channel other than displayed in Current channel.
4 Click Save.
DMS3-CTC-25-552 v1.0
DWA0120 web interface.
"4.1.1 Accessing the DWA0120 web interface from your local network" on page
channel.
DWA0120 web interface.
"4.1.1 Accessing the DWA0120 web interface from your local network" on page
channel.
"3.2 Wi-Fi security" on page
DWA0120 web interface.
"4.1.1 Accessing the DWA0120 web interface from your local network" on page
.
30.
30.
.
27.
7 Support
36.
36.
36.
75