Printing Images Directly Using A Pictbridge Compliant Printer - Sony DSC-R1 User's Manual / Troubleshooting

Printing images directly using a PictBridge
compliant printer
Even if you do not have a computer, you
can print images shot using your camera by
connecting the camera directly to a
PictBridge compliant printer.
• "PictBridge" is based on the CIPA standard.
(CIPA: Camera & Imaging Products
Association)
In single-image mode
You can print a single image on a printing
sheet.
In index mode
You can print several images at a reduced
size on a printing sheet. You can print a set
of either the same images (1) or different
images (2).
1
• An index print function may not be provided
depending on the printer.
• The quantity of images that can be printed as an
index image differ depending on the printer.
• You cannot print RAW data files.
• If the indicator flashes on the screen of the
camera for about five seconds (error
notification), check the connected printer.
2
Stage 1: Preparing the camera
Prepare the camera to connect it to the
printer with the USB cable. When
connecting the camera to a printer that is
recognized when [USB Connect] is set to
[Auto], Stage 1 (steps 1 - 4) is unnecessary.
• It is recommended to use the AC Adaptor to
prevent the power from turning off partway
through printing.
1
Press MENU to display the menu.
2
Move the multi-selector to B to
select (Setup).
3
Select [ ] (Setup2) by moving to
2
V, then select [USB Connect] by
moving to v/V/B.
4
Select [PictBridge] by moving to
B/v, then press the center of the
multi-selector.
The USB mode is set.
/
button
Multi-selector
MENU button
99