Using The (Setup) Screen - Sony DSC-R1 User's Manual / Troubleshooting

Using the
You can change the default settings using the
1
Turn on the power.
2
Press MENU to display the menu.
3
Move the multi-selector to B to select
selector to B.
4
Move the multi-selector to v/V/b/B to
select the item you want to set.
The frame of the selected item turns yellow.
5
Press the center of the multi-selector to enter the setting.
To turn off the
To return to the menu from the
z When the menu is not displayed
Pressing down MENU for about 1.5 seconds turns the
To cancel the
Select [Cancel] if it appears, then press the center of the multi-selector. If it does not appear,
select the previous setting again.
• This setting is maintained even when the power is turned off.
32
(Setup) screen
(Setup) screen, press MENU.
(Setup) screen, move the multi-selector to b repeatedly.
(Setup) setting
(Setup) screen.
Mode dial
(Setup), then move the multi-
Multi-selector
MENU button
(Setup) screen on.