Printing Images Directly Using A Pictbridge Compliant Printer - Sony Cyber-Shot DSC-S730 Instruction Manual

Printing images directly using a PictBridge
compliant printer
Stage 1: Preparing the camera
1
Press MENU to display the menu.
• It is recommended to use batteries with enough
power remaining or an AC Adaptor (not
supplied) to prevent the power from turning off
partway through printing.
Prepare the camera to connect it to the
printer with the dedicated USB cable.
Index button
T)
In single image mode
You can print a single image on a printing
sheet.
• "PictBridge" is based on the CIPA standard.
(CIPA: Camera & Imaging Products
Association)
Even if you do not have a computer, you
can print images shot using your camera by
connecting the camera directly to a
PictBridge compliant printer.
t(
PictBridge
In index mode
You can print several images at a reduced
size on a printing sheet. You can print a set
of either the same images
(CD)
or different
images
(®).
• An index print function may not be provided
depending on the printer.
• The quantity of images that can
be
printed as an
index image differ depending on the printer.
• You cannot print movies.
• If the
t(
indicator flashes on the screen of the
camera for about five seconds (error
notification), check the connected printer.
. '
.'
The USB mode is set.
4
Select [PictBridge] with
~/..,
then
press
e.
- . SetuD02' '
; •
~.I.='~~g,~
.
.Clock~:
...
..
~
-"
'
".
3
Select
~
(Setup2) with
~,
then
select [USB Connect] with
AlT/~.
2
Press
~
on the control button to
select
II
(Setup).
®
CD
76