ZyXEL Communications ZyAIR G-5100 Support Notes page 48

Configure Access Point as a AP + bridge/repeater mode
AP + Bridge mode Introduction
Configuration for wireless station A
Configuration for wireless station B
Introduction
What is AP+Bridge mode Functionality?
Wireless station can only associated with device in access point mode. If a device is configured in bridge/repeater mode it means the other peer is another bridge/
repeater not a wireless station. ZyXEL implement a new feature letting the Access point & bridge/repeater function mixed in the same device.
In AP+Bridge mode, the ZyAIR G-5100 support both AP(the wireless station can connect to the wired network through AP) and bridge(two APs can communicate
with one another) connection at the same time.
Note: When the ZyAIR G-5100 is in AP+Bridge mode, the traffic between ZyAIRs(WDS) is not encrypted. The security settings on the ZyAIR refer to the traffic
between the wireless station and the ZyAIR.
Configuration for Wireless Station A
1. Click Advanced and Wireless.
2. Select AP+Bridge in the Operation Mode drop-down list box to display the screen as down.
3. Type a name to identify the ZyAIR in the wireless LAN(up to 32 characters) as the ESSID.
4. Select the Channel in the Choose Channel ID field.
5. Type the MAC address of peer device in the Remote Bridge MAC Address field, that is, six hexadecimal character pairs.
6. Click Apply to finish.