ZyXEL Communications ZyAIR G-5100 Support Notes page 38

4. All access points must use the same port number to relay roaming information.
Configuration AP1 for Roaming using Web configurator
●
To Enable the roaming feature if you have two or more ZyAIRs on the same subnet. Follow the steps below to allow roaming on your ZyAIR.
1. From the Web configurator main menu, Click Advanced->wireless than select roaming tab in wireless page.
2. Select 'Yes' from the pull down menu under Roaming configuration and specify the roaming port.
3. Upon completion click Apply to make configuration take effect.
Configuration AP2 for Roaming using Web configurator
●
To Enable the roaming feature if you have two or more ZyAIRs on the same subnet. Follow the steps below to allow roaming on your ZyAIR.
1. From the Web configurator main menu, Click Advanced->wireless than select roaming tab in wireless page.
2. Select 'Yes' from the pull down menu under Roaming configuration and specify the roaming port.
3. Upon completion click Apply to make configuration take effect.
field description
Active Use the pull down menu to select Yes to enable roaming on the ZyAIR if you have two or more
ZyAIRs on the same subnet.