Trouble Shooting - Biostar M7MKE User Manual

Chapter 4

4. Trouble shooting

Power cable is
unplugged.
Defective power cable.
Power supply failure.
Faulty wall outlet; circuit
breaker or fuse blown.
Memory DIMM is
partially dislodged from
the slot on the
motherboard.
%)*#
Visually inspect power
cable.
Visually inspect the cable;
try another cable.
Power cable and wall
socket are OK, but system
is still dead.
Plug in device known to
work in socket and test
%)*#
Turn off computer. Take
cover off system unit.
Check the DIMM to
ensure it is securely
seated in the slot.
Trouble shooting
Make sure power cable is
securely plugged in.
Replace cable.
Contact technical support.
Use different socket,
repair outlet, reset circuit
breaker or replace fuse.
Using even pressure on
both ends of the DIMM,
press down firmly until the
module snaps into place.