Product Dimensions; Installation Clearances - GE JVW5301 Installation Instructions Manual

PRODUCT DIMENSIONS

7-1/16"
30" to 36"
13"
3-5/16"
2"
4-1/4"
2
Installation Preparation
8-1/4"
17-3/8" Min.
24-7/16" Max.
13"
9-7/8"
18-1/2"
5"
1-3/8"

INSTALLATION CLEARANCES

These vent hoods are designed to be installed
onto a wall with no above cabinets.
24" Required Min.
38" Recommended Max.
The vent hood must be installed 24" minimum
above the cooking surface. For optimal
performance and usability, installing the hood
more than 38" above the cooking surface is
not recommended. The hood installation height
above the cooking surface depends upon ceiling
height and duct cover limitations. The telescopic
duct cover conceals the ductwork running from
the top of the hood to the ceiling. For supplied
duct cover ceiling heights, see table on page 5.
NOTE: Installation height should be measured
from the cooking surface to the lowest part
of the hood. This hood must be installed onto
a wall. It can be vented to the outdoors, or it
can be installed for recirculating operation. For
recirculation operation, see Recirculation Install
Planning.
1" = 2.5 cm; 1' = 0.3 m
29-6067