Chapter 2: Hardware Installation; Installing Central Processing Unit (Cpu) - Biostar K8T800-A7A User Manual

CHAPTER 2: HARDWARE INSTALLATION

2.1 I
NSTALLING
Step 1: Pull the lever toward direction A from the socket and then raise the
lever up to a 90-degree angle.
Step 2: Look for the cut edge on socket, and the gold triangle on CPU
should point forwards this cut edge. The CPU will fit only in the
correct orientation.
Step 3: Hold the CPU down firmly, and then close the lever to complete
the installation.
Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU
FAN power cable to the JCFAN1. This completes the installation.
K8T800-A7A
C P
ENTRAL ROCESSING
A
5
U (CPU)
NIT
90