Electronic Control; Start Up; Press And Go Menu - Garland Master MCO-ES-10S Installation, Operation And Maintenance Manual

OPERATING INSTRUCTIONS

Electronic Control

Start Up

When the controller is off the display will be blank. Pressing
the main power switch ON will activate the controller and
the splash screen (photo 1) displaying the software version
and then the home screen (photo 2), will appear on the user
interface. The home screen displays the four main icons of
the control - the Press and Go Menu (square pattern) in
the upper left, Settings Mode (gear cog) in the lower left,
Manual Mode (chef's hat) in the upper right and the Pause
for Cleaning (hand and cloth) button in the lower right.
Note that If the door is opened during a cooking mode, the
fan and heat will stop, the interior light comes on, the control
will pause and the display will indicate door is open symbol
(see photo 3) until the door is closed. This is a patented
safety feature. This period of pause allows time for removing
product and restarting the cook cycle.
If one opens the door slightly for more than three seconds
the oven will enter a Cool Down mode and deactivate
the heat and turn the fan on high until the oven cavity
temperature drops below 150°F (66°C). The Cool down
will operate when the door is opened slightly (at least five
degrees). Optimal cool-down will be achieved with the door
open slightly. When the door opens wider, the Cool Down
mode will deactivate and the display will indicate Door Open
(Photo 3). This is a patented safety feature. Cool Down is not
active during a cook cycle.
Photo 1
Document # G_EO_OM_CONVECTION_4605649 – 11/20
Photo 2
Photo 3
Press and Go Menu (square pattern)
Allows quick access to existing recipes (see photo 7).
Photo 7
One need only select the desired icon.
11