Control Iphone/Ipod Menu; Charging Your Ipod/Iphone/Ipad; Usb Operation; Aux Operation - Hitachi AXM8410C Instruction Manual

Control iPhone/iPod menu

1. During the DOCK mode, tap the MENU icon
on the unit or press the MENU button on the
remote control to enter the iPod/iPhone/iPad
MENU mode.
2. Press the / buttons on the remote control
 
to navigate in the iPod/iPhone/iPad menu.
3. Press the ENTER button on the remote
control to confirm selection.
4. Press the MENU button on the remote
control to return to the previous iPod/
iPhone/iPad menu.

Charging your iPod/iPhone/iPad

1. Your iPod/iPhone/iPad has an internal non-
removable battery. The battery may need to
be charged if it has not been used for a while.
2. During the STANDBY or ON mode, you can
automatically charge the iPod/iPhone/iPad
through the unit when it is docked.
The iPod/iPhone/iPad battery is fully charged in
about a few hours. If you charge it while playing
music, it may take longer.
• You can control the iPod/iPhone/iPad player
with the remote control or iPod/iPhone/iPad
player itself while the unit is in DOCK iPod
mode.
• The unit can support most generations of
the iPod. Check your particular model for the
iPod generation supported.

USB Operation

1. Press down on the PUSH logo on the docking
cover of the unit to flip up the docking cover.
2. While in the ON mode, tap the
repeatedly on the unit or press the USB
button on the remote control to select USB
mode.
3. Connect a USB device to USB
directly or with a USB cable (not included).
4. The unit automatically starts playback.
5. Tap the icon on the unit or press the
BF
button on the remote control to start /
BF
pause / resume playback.
6. Tap the
H / G
buttons on the remote control to
H / G
select a MP3/WMA file number.
7. Press the / buttons on the remote control
 
to select the desired folder (if the USB
memory device has more than one folder).
8. Tap the L icon on the unit or press the
button on the remote control to stop playback.
• The unit can only play MP3 and WMA file
formats in USB operation.
• The unit cannot play WMA files protected by
"DRM FILE".
• The unit may not compatible with all USB
devices, this is not an indication of a problem
with the unit.

AUX Operation

There are AUX IN (L/R) sockets located at the
rear of the unit. Analogue audio sound signals
from other sources can be connected to the unit
through these sockets.
1. Connect to another audio device using the
AUX IN (L/R) sockets via a RCA stereo audio
cable (not included).
2. While in the ON mode, tap the
repeatedly on the unit or press the AUX
button on the remote control to select AUX
mode.
3. Turn the VOL + / VOL – dial on the unit or
press the VOL + / VOL – buttons to adjust the
volume to your desired level.
4. In AUX mode, operate your audio device
directly for playback features.
17
icon
port
icons on the unit or press the
icon