Oster 4126 Manual page 2

English
Français/French
Deutsch/German
Español/Spanish
Português/Portuguese
Italiano/Italian
Nederlands/Dutch
Svenska/Swedish
Suomi/Finnish
Dansk/Danish
Norsk/Norwegian
Polski/Polish
Čeština/Czech
Slovenčina/Slovakian
Magyar/Hungarian
Român/Romanian
български/Bulgarian
Hrvatski/Croatian
Ελληνικά/Greek
Русский/Russian
‫الع ر ب ية‬
/ Arabic
FITTING A PLUG
If the plug is not suitable for the socket outlets in your home, it
can be removed and replaced by a plug of the correct type.
If you remove the plug it must not be connected to a 13 amp
socket and the plug must be disposed of immediately.
NOTE: If the terminals in the plug are not marked or if you are
unsure or in doubt about the installation of the plug please
contact a qualified electrician.
If a 13A 3-pin plug is fitted, it must be an ASTA approved plug,
conforming to BS1363 standard. Replacement fuses must be
ASTA BS1362 approved.
The wires of the mains lead are coloured in accordance with
the following code:
GREEN/YELLOW
BROWN
BLUE
The wire which is coloured GREEN/YELLOW must be
connected to the terminal in your plug which is marked with
an E or by the earth symbol ( ) or coloured GREEN or
GREEN /YELLOW.
(UK ONLY)
- EARTH
- LIVE
- NEUTRAL
The wire which is coloured BLUE must be connected to the
terminal in your plug which is marked with the letter N or
coloured BLACK.
The wire which is coloured BROWN must be connected to
the terminal in your plug which is marked with the letter L or
coloured RED.
4
8
12
16
20
24
28
32
36
40
44
48
52
56
60
64
68
72
76
80
84
3A