Replacing The Broil Burner - Bosch 800 Series Service Manual

58300000194725 ARA EN B
Figure 26 Broil HSI wires are visible after removing rear housing cover
6. Remove screws securing the broil flame spreader/burner
assembly, and place assembly on protected work surface.
Figure 27 Broil flame spreader/burner assembly with HSI
Copyright by BSH Home Appliances Corporation
This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
MAY 2016
7. Remove the screws (and nuts) securing the igniter to the
mounting bracket.
Figure 28 Broil igniter
8. Test and/or replace the igniter.
9.
operation.

6.6.2 Replacing the Broil Burner

1. Follow steps 1-7 in Replacing the Broil Igniter section.
2. Remove the nut, washers and screw securing the broil burner
tube to the flame spreader.
Figure 29 Broil flame spreader/burner assembly with HSI
1901 Main St ▪ Suite 600 ▪ Irvine, CA 92614
Service Manual for Bosch 800 Series Gas Slide-in Ranges
Reassemble, restore power and gas supply, and test
Page 22 of 36
800 944-2904