Jet Holders - Bosch 800 Series Service Manual

58300000194725 ARA EN B
CAUTION

Since it produces a DC voltage, flame rectification is dependent
upon having correct polarity and a good ground.
power must have the correct polarity and each burner base,
as well as the spark module, must be solidly grounded.

NOTICE
If the customer's electrical supply has the line (L) and neutral
(N) wires reversed, there will be no DC voltages and burners
won't stay lit (since the "voltages" are from neutral to ground).
5.4

Jet Holders

Jet holder service assemblies include the jet holder, igniter
(electrode), orifice (jet), air shutter screw, compression nut and tubing.
Jets and electrodes may be ordered separately. To replace all other
parts, the complete jet holder assembly must be ordered.
Figure 6 Jet holder assembly example
Copyright by BSH Home Appliances Corporation
This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
MAY 2016
Incoming
1 Jet holder
2 Igniter (electrode)
3 Air shutter screw
4 Orifice (jet)
5 Compression nut
1901 Main St ▪ Suite 600 ▪ Irvine, CA 92614
Service Manual for Bosch 800 Series Gas Slide-in Ranges
Page 13 of 36
800 944-2904