Disassembly And Replacement; Preparing Disassembly; Disassembling The Digital Controller Assembly; Preparing The Components For Storage/Further Use - Bosch Rexroth SYHNC100-SEK 3 Series Operating Instructions Manual

40/44 Bosch Rexroth AG

Disassembly and replacement

10 Disassembly and replacement
10.1

Preparing disassembly

NOTE
The device might be destroyed!
Decommission the entire system as described in the overall system manual.
De-energize the device and all connected components.
10.2

Disassembling the digital controller assembly

Proceed as follows to disassemble the SYHNC100-SEK...3X:
Pull off the connection lines and plugs.
Release the SYHNC100-SEK...3X from the top hat rail.
Press down
Fig. 16: Disassembly of the SYHNC100-SEK...3X from the top hat rail
10.3

Preparing the components for storage/further use

Proceed as follows in order to prepare the SYHNC100-SEK...3X for storage and
further use:
Only use the geniune packaging for storage.
Observe the admissible storage temperature range that is specified in
RE 30162.
Protect against dust and humidity.
SYHNC100-SEK...3X | RE 30162-B/04.11
Apply pressure and
tilt out top down.