Dotcode On/Off; Poor Quality Dotcodes; Dotcode Message Length - Honeywell HH490 User Manual

DotCode On/Off

Poor Quality DotCodes

This setting improves the scanner's ability to read damaged or badly printed
DotCodes.

DotCode Message Length

Scan the barcodes below to change the message length. Refer to
Length Description
Maximum lengths = 1-2400. Minimum Default = 1, Maximum Default = 2400.
130
On
Default = Poor Quality DotCodes Off.
Poor Quality DotCodes On
(page 82) for additional information. Minimum and
Minimum Message Length
* Off
* Poor Quality DotCodes Off
Message
Maximum Message Length
HH490 User Guide