Page 1
EndoVue Plus 15" and 19" USER MANUAL ENGLISH...
Page 3
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. This document is subject to change without notice. NDS provides this information as reference only. Reference to products from other vendors does not imply any recommendation or endorsement.
Table of Contents Tab 1 Warnings and Cautions ----------------------------------------------------------------------------- ii Declaration of Conformity -------------------------------------------------------------------------- iii Legal Statement --------------------------------------------------------------------------------------- iii Tab 2 About This Manual ------------------------------------------------------------------------------------ 1 Intended Use and Contraindications ------------------------------------------------------------ 1 Image Retention Notice ---------------------------------------------------------------------------- 1 Quick Startup ------------------------------------------------------------------------------------------- 1 Powering On The Unit ---------------------------------------------------------------------------- 1 First Time Users and Initial Test ---------------------------------------------------------------- 1 Tab 3...
Warnings and Cautions This symbol alerts the user that important information regarding the installation and / or operation of this equipment follows. Information preceded by this symbol should be read carefully in order to avoid damaging the equipment. This symbol warns user that un-insulated voltage within the unit may have sufficient magnitude to cause electrical shock.
NDS neither assumes nor authorizes any person to assume for it any other liabilities in conjunction with and/or related to the sale and/or use of its products. To ensure proper use, handling and care of NDS products, customers should consult the product specific literature, instruction manual, and/or labeling included with the product or otherwise available.
Apply power to the peripheral device, then to the display. The power switch location is shown on page 2. The NDS logo is displayed, followed shortly by video. The electronics, designed by NDS, incorporates proprietary SmartSync™ technology which at initialization, examines the incoming signal and automatically displays the video image in its proper format. This eliminates adjustments for most video sources.
Connector Panel Notes 1. An RGBS, YPbPr signal may be applied via the VGA/RGBS connector. 2. A DVI, RGBS YPbPr signal may be applied via the DVI-I/RGBS connector. 3. The ND-OS connector allows BIOS upgrades to be installed. See page 17 for details. 4.
Control The display is controlled via a 6 button keypad. The keypad, located on the bottom front of the display, allows the user to make adjustments to various display parameters using the On Screen Menus (OSM) system. Image Adjustments Adjust Brightness Press the Brightness / Contrast button to display the Brightness control.
Menu Systems Overview Press the MENU button once to open the Menu System. The current video input and its resolution are shown in the Display Mode tab on the top left of the menu. The Menu System opens with Picture menu displayed.
Video Source Inputs Menu When the display is powered on and Auto Source Select is on, then Auto Source Select looks at the previously selected input first. If a signal is present it is displayed, otherwise Auto Source Select starts scanning the inputs for a signal.
Setting Up the Display HD-SDI Picture Menu SD-SDI, S-Video, Composite Picture Menu Horizontal Position Moves the image to the left or right. Press ◄ or ► to horizontally center the image. Vertical Position Moves the image up or down. Press ◄ or ► to vertically center the image. Sharpness Press ◄...
Select using ◄ or ► buttons. SmartSync / Alternate Modes On initialization NDS’ proprietary SmartSync technology examines the incoming signal and automatically displays the video image in its proper format. To run SmartSync select the SmartSync / Alternate Modes parameter and press the ◄ button. An Alternate Mode may be selected by pressing the fl button.
DVI Digital Picture Menu Overscan (Video) This parameter is enabled when the input is video (camera) data. 0 = The image is displayed at a size that fills the screen without losing any video information. The image presented to the display may include black bars top and bottom or left and right. 1, 2, 3, 4, 5 or 6 = The image is linearly enlarged, while remaining centered, in incremental steps.
Color Menu Gamma: Press ◄ or ► to select a preset Gamma (1.8, 2.0, 2.2, or 2.6), Video PACS Notes: Video is a color corrected Look Up Table (LUT). PACS is a DICOM-like LUT. Note: This product is capable of displaying Radiology (PACS) images for reference, not diagnostic, purposes only.
Setup Menu Menu Position Places the menu in 1 of 9 predefined screen positions. Press the ◄ or ► button to select any of the 9 screen positions. Language Selects 1 of 8 languages: English, Deutsch, Francais, Italiano, Svensk, Espanol, Nederlands and Pycckий Press the ◄...
Defaults Menu Factory Defaults Displays Restoring Factory Defaults message and returns all settings to their factory preset values. Press the SCROLL button to highlight Factory Defaults, then press the ► button. User Defaults Allows up to five customized user settings to be saved. Setting User Defaults 1.
Frequency is set correctly. Black Screen Power the display Off and On. If the NDS logo appears then the display is working properly. Check if the power management feature (DPMS) is enabled. A “Searching” message appears when the video source is not present or when an input source is out of the display’s resolution range.
Cable Cover Installation 1. Connect the power and video cables to the display before installing the cable cover. 2. Align tabs A and B with the wide areas of slots A and B. See figure 1. 3. Push tabs A and B into the wide areas of slots A and B until the cable cover is touching the back of the display.
Data Connectors and Pin Outs DVI-I* VGA / RGBS / YPbPr Digital & Analog 1 RED 6 GND RED 11 N. C. DVI-I supports digital and analog (RGBS/YPbPr). 2 GREEN 7 GND GREEN 12 DDC_SDA Analog data appear on pin 8 and pins, C1 through C5. 3 BLUE 8 GND BLUE 13 HORIZ SYNC...
Data + Ground No Connection Ground No Connection Note: No Connection Flash Upgrade Cable part number: 35Z0047 is available from NDS. Flash Upgrade and Serial Control Rx Power Connectors and Pin Out 24 volt connector + 24...
SDI Supported Resolutions DVI Supported Resolutions Horizontal Vertical Vertical Horizontal Vertical Vertical Signal Parameter Supported Range Resolution Resolution Frequency Resolution Resolution Frequency Active Resolution 640 x 480 min to 1920 x 1200 max (pixels) (lines) (Hz) (pixels) (lines) (Hz) (Horizontal x Vertical 480i 29.97 1280...
Ethanol 80 % by volume Unacceptable solvents: MEK (Methyl Ethyl Ketone) Toluene Acetone *Note: The acceptable cleaning and disinfecting materials listed above have been tested on NDS products and, when used as directed, do not harm the product’s finish and or its plastic components.
Electromagnetic Compatibility Tables All medical electronic devices must conform to the requirements of IEC 60601-1-2. Precautions, adherences to the Electromagnetic Compatibility (EMC) guideline information provided in this manual and verification of all medical devices in simultaneous operation are required to ensure the electromagnetic compatibility and co- existence of all other medical devices prior to a surgical procedure.
Page 29
Electromagnetic Emissions Emissions Compliance Electromagnetic environment-- guidance RF emissions Group 1 The product uses RF energy only for its internal function. Therefore, its RF emissions are very low and are not likely to cause any interference in nearby CISPR 11 electronic equipment.
Page 30
Electromagnetic Immunity Guidance and Manufacturer’s Declaration: Electromagnetic Emissions The product is intended for use in the electromagnetic environment specified below. The customer or the user of the product should assure that it is used in such an environment. Immunity Test Immunity Test Electrostatic discharge (ESD) IEC 61000-4-2 ±2, ±4, ±6, ±8kV contract discharge...
Page 31
Recommended Separation Distances Recommended separation distances between portable and mobile RF communications equipment and the product The product is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the product can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the product as recommended below, according to the maximum output power of the communications equipment.
Page 36
Tokyo 140-0013 Japan +81 3 5753 2466 info@ndssi.com Oriental Media Center Suite 2302, Tower C No.4, Guang Hua Road Chao Yang District Beijing, 100026 China +86 10 8559 7859 info@ndssi.com NDS Quality System ISO 13485 FDA Registration #2954921 60A0564 Rev D...