Canon iP2700 Simplified Service Manual page 9

No. Name
(12) Platen
(13) EEPROM Clear
(14) Panel Check
(15) Set Destination
(16) CD-R Correction
(17) LF / EJECT
Correction
(18) Left Margin
Correction
(19) Ink Absorber
Counter
(20) Wetting Liquid
Counter
(21) Flatbed Scanner
*
* New functions in Service Tool version 1.071:
(5) EEPROM information saving
(9) Enabling / disabling of automatic print head cleaning
(21) Individual scanner adjustment
< Ink absorber counter setting >
Set the ink absorber counter value to a new EEPROM after the logic board is replaced in servicing.
1) Before replacement of the logic board, check the ink absorber counter value in EEPROM
information print.
2) In the Ink Absorber Counter section of the Service Tool, select Main from the Absorber
pull-down menu.
3) From the Counter Value(%) pull-down menu, select the value (in 10% increments) which is the
closest to the actual counter value confirmed before replacement of the logic board.
4) Click Set.
Function
Platen ink absorber
counter resetting
EEPROM initialization
Button and LCD test
Destination settings
CD / DVD print position
correction (X and Y
direction)
LF / Eject correction value
setting
Left margin correction
value setting
Ink absorber counter
setting
Wetting liquid counter
setting
Individual scanner
adjustment
(9/23)
Remarks
Not used.
The following items are NOT initialized, and the
shipment arrival flag is not on:
- Destination settings
- Ink absorber counter value
- Record of disabling the function to detect the
remaining ink amount
- Printer serial number
- Ink cartridge region code
- Record of ink absorber counter resetting and
setting
- Record of repair at the production site
Not used.
Select the destination, and click Set.
ASA, AUS, BRA, CHN, CND, EUR, JPN, KOR, LTN,
TWN, USA
Not used.
Not used.
Not used.
See " Ink absorber counter setting " below.
Not used.
Not used.