Canon iP2700 Simplified Service Manual page 3

Error
Error
code
Non-supported [1485] 5 times
ink cartridge
installed.
Ink cartridge in a [1486] 7 times
wrong position.
Multiple ink [1487] 7 times
cartridges of the
same color
installed.
Warning: The [1700] 8 times
ink absorber
becomes almost
full.
LED
(Blinking in Status Monitor message
orange)
The following ink cartridge cannot be
recognized.
Color
Black
Printing cannot be executed because
the ink cartridge may not be installed
properly or may not be compatible
with this printer.
Install the appropriate ink cartridge.
If you want to cancel printing, click
Cancel Printing.
An ink cartridge is not installed in the
correct position.
Install the following ink cartridge in
the appropriate position. If printing is
in progress, cancel printing and
install the ink cartridge.
Color
Black
More than one ink cartridge of the
following type is installed.
Color
Black
Use only one ink cartridge per type at
a time.
The ink absorber is almost full.
Press the printer's RESUME button
to continue printing.
The printer will soon require servicing
to replace the ink absorber.
Contact the support center or the
service center.
The ink absorber can only be
replaced by a qualified technician.
(3/23)
Solution
A non-supported ink cartridge is
installed. Install the supported ink
cartridge. If the error is not
cleared, the ink cartridge may be
defective. Replace the ink
cartridge.
Install the ink cartridge(s) in the
correct position. If the error is not
cleared, the ink cartridge may be
defective. Replace the ink
cartridge.
Replace the wrong ink cartridge(s)
with the correct one(s). If the error
is not cleared, the ink cartridge
may be defective. Replace the ink
cartridge.
Replace the ink absorber, and
reset its counter. (See 2-1,
Service Mode.) Pressing the
Resume/Cancel button will exit
the error, and enable printing
without replacing the ink absorber.
However, when the ink absorber
becomes full, no further printing
can be performed unless the
applicable ink absorber is
replaced.