Automatic Temperature Control (Atc); Climate Voice Commands - Dodge CHARGER 2021 Owner's Manual

Mix Mode
Air is directed through the floor,
defrost, and side window demister
outlets. This setting works best in cold
or snowy conditions that require extra
heat to the windshield. This setting is good for
maintaining comfort while reducing moisture on
the windshield.
Climate Control OFF Button
Press and release the OFF button on
the touchscreen, or push the OFF
button on the faceplate to turn the
Climate Control ON/OFF.
A T
UTOMATIC EMPERATURE
(ATC)
Automatic Operation
1. Push the AUTO button on the faceplate, or
the AUTO button on the touchscreen on the

Automatic Temperature Control (ATC)

Panel.
2. Next, adjust the temperature that you would
like the system to maintain by adjusting the
driver and passenger temperature control
buttons. Once the desired temperature is
displayed, the system will achieve and
automatically maintain that comfort level.
3. When the system is set up for your comfort
level, it is not necessary to change the
settings. You will experience the greatest
efficiency by simply allowing the system to
function automatically.
NOTE:
It is not necessary to move the temperature

settings for cold or hot vehicles. The system
automatically adjusts the temperature,
mode, and blower speed to provide comfort
C
ONTROL
as quickly as possible.
The temperature can be displayed in U.S. or

Metric units within Uconnect Settings
Ú page 140.
To provide you with maximum comfort in the
Automatic mode during cold start-ups, the
blower fan will remain on low until the engine
warms up. The blower will increase in speed
and transition into Auto mode.
GETTING TO KNOW YOUR VEHICLE
Manual Operation Override
This system offers a full complement of manual
override features. The AUTO symbol in the front
ATC display will be turned off when the system
is being used in the manual mode.
C V C
LIMATE OICE OMMANDS
Adjust vehicle temperatures hands-free and
keep everyone comfortable while you keep
moving ahead.
Push the VR button. After the beep, say one of
the following commands:
"Set the driver temperature to

70 degrees"
"Set the passenger temperature to

70 degrees"
TIP:
Voice Command for Climate may only be used
to adjust the interior temperature of your
vehicle. Voice Command will not work to adjust
the heated seats or steering wheel if equipped.
59
2