Tire Service Kit - If Equipped; Tire Service Kit Storage; Tire Service Kit Components And Operation - Dodge CHARGER 2021 Owner's Manual

Hide thumbs Also See for CHARGER 2021:
Table of Contents

Advertisement

10. Finish tightening the wheel bolts. Push
down on the wrench while at the end of the
handle for increased leverage. Tighten the
wheel bolts in a star pattern until each
wheel bolt has been tightened twice. If in
doubt about the correct tightness, have
them checked with a torque wrench by an
authorized dealer or at a service station
Ú page 341.
11. Stow the wheel chocks, jack, tools and flat
tire. Make sure the base of the jack faces
the front of the vehicle before tightening
down the fastener.
WARNING!
A loose tire or jack thrown forward in a
collision or hard stop could endanger the
occupants of the vehicle. Always stow the jack
parts and the spare tire in the places
provided. Have the deflated (flat) tire repaired
or replaced immediately.
TIRE SERVICE KIT — IF EQUIPPED
Small punctures up to 1/4 inch (6 mm) in the
tire tread can be sealed with Tire Service Kit.
Foreign objects (e.g., screws or nails) should not
be removed from the tire. Tire Service Kit can be
used in outside temperatures down to
approximately -4°F (-20°C).
This kit will provide a temporary tire seal,
allowing you to drive your vehicle up to
100 miles (160 km) with a maximum speed of
50 mph (80 km/h).
T
S
K
S
IRE
ERVICE
IT
TORAGE
The Tire Service Kit is located in the trunk.
Tire Service Kit Location
IN CASE OF EMERGENCY
T
S
K
C
IRE
ERVICE
IT
OMPONENTS
O
PERATION
Tire Service Kit Components
1 — Sealant Bottle
2 — Deflation Button
3 — Pressure Gauge
4 — Power Button
5 — Mode Select Knob
6 — Sealant Hose (Clear)
7 — Air Pump Hose (Black)
8 — Power Plug (located on the bottom side of the
Tire Service Kit)
267
A
ND
7

Advertisement

Table of Contents
loading

Table of Contents