Unpacking Your Enclosure; Unpacking Instructions - Belkin RK1000 User Manual

Unpacking your Enclosure

1
2
4
DETAIL A
DETAIL A
5

Unpacking Instructions

1. Removal of the stretch wrap. To prevent damage to the Enclosure, cut the stretch
wrap at one of the corrugated corners using a utility knife.
2. Remove the corrugated top and corners.
3. Remove the skid brackets from the skid, using a 1/2" socket wrench. Remove the
hex from the Enclosure by using the 3/8" socket wrench.
4. This step requires two or more people. With one person standing on each side of
the Enclosure, slowly roll the Enclosure to the back of the skid. Proceed until all four
casters contact the floor.
5. Verify that you have received all hardware and components with your Belkin
Enclosure. Contact Belkin support if you feel items are missing.
Mounting hardware and keys can be found in bag attached to one of the vertical mounting rails.
NOTE: Skid should be saved if you need to reship the Enclosure.
(Belkin is not responsible for damage caused by re-shipment of this Enclosure).
Please recycle shipping materials whenever possible.
Belkin Enclosure - User Manual v 1.0.0
A
A
6 7
Page 4
1 Corrugated top
2 Stretch wrap
3 3/8" hex
4 1/2" hex
5 Corrugated corners
6 Shipping skid
7 Skid brackets
P74789