Belkin P35767ec Instructions

RK1003ek INSTRUCTIONS
RK1003ek Product Inventory
Wall Mount Enclosure (1)
12-24 Screw (50)
Key (4)
Instructions
1. Use the template on the shipping box to locate your mounting holes.
2. Your wall mount has been designed to be reversible, allowing it to swing left or right.
3. Determine left or right swing requirement before hanging your wall mount.
4. Your RK1003ek is designed to use 1/4"(6mm) hardware, 16"(406mm) on center (wall mounting hardware
not included).
When installing your RK1003ek wall-mounted rack enclosure to materials such as wood, cinder block,
concrete, etc., consider the load capacity within the wall-mount structure, and be certain to check with
local authorities to determine the appropriate hardware requirements for these conditions. Because wall
compositions may vary at different installation sites, Belkin cannot warrant the fitness or suitability of any
installation instructions or installation hardware it may provide for wall-mount rack enclosures. Belkin hereby
DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MER
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THE SUFFICIENCY, FITNESS
OR SUITABILITY OF ANY INSTALLATION INSTRUCTIONS OR INSTALLATION HARDWARE BELKIN MAY PR
OVIDE FOR WALL-MOUNTED ENCLOSURES. Belkin recommends that an experienced maintenance and/or
technical person be consulted regarding the proper wall-mounting hardware and procedures to be used for the
anticipated load capacity of the wall-mounted rack enclosure.
Belkin Tech Support
Europe: 00 800 223 55 460
For other languages: www.belkin.com/support
RK1003ek Instructions
EN
DE
FR
P35767ec