Whirlpool FSCR12441 Health & Safety, Use & Care And Installation Manual page 32

Close the tank flap and push the detergent
dispenser back into the dispenser compartment .
The Auto dosing system is ready for use now
If you prefer dosing the detergent manually
and you do not want to use the Auto dosing
function.
You can permanently deactivate the function as
follows:
• Press and hold the Settings button until
the display indicates that you have entered
the settings mode .
• Press the UP or DOWN key to navigate to "9 .
AUTO DOSING", and confirm by pressing the OK
key .
32
• Press the UP or DOWN key to select if you want
the function to be switched on or off, and confirm
by pressing the OK key .
• To exit the settings menu, select "BACK ";
afterwards select and confirm "EXIT" . Or
alternatively wait a few seconds until the settings
menu will be exited automatically .
For manual detergent dosing, only use the manual
detergent dosing chamber (see section Detergent
Dispenser) – do not use the Tanks .