Table of Contents
Advertisement
INDICATORS
DOOR CAN
BE OPENED
WATER /
ENERGY
MONITOR
CONNECTION
STATUS
DESCALING
FAILURE
MESSAGES
This indicator will light
• before you have started a programme
• when you have paused a programme and the water level is not too
high, or the laundry is not too hot in that programme phase
• when a programme is finished and the laundry can be unloaded
Gives feedback about the water and energy consumption of your
programme setting . The less indicators light up, the more economic is
your programme setting . Can still adapt after sensing phase of laundry
load .
If your washing machine has been already connected to the Internet
(see 6
Sense Live Feature/ Setup Procedure section in the Use and Care
th
Guide) and the radio is on, this indicator provides a feedback about the
status of the Internet connection through your WiFi router .
When you switch on the washing machine, the connection status
indicator blinks: the washing machine is looking for a connection . When
it becomes solidly lit, it means that the appliance is properly connected
to the Internet .
The strength of the wireless signal is shown by the indicator (when all
the elements of the indicator are lit, the signal strength is strong)
A display message will remind you regularly to descale the washing
machine . Find descaler appropriate for the washing machine (WPRO) on
www .whirlpool .eu .
To cancel the display reminder, press the OK key .
Refer to the Troubleshooting section for more information .
EN
27
Advertisement
Table of Contents
