Table of Contents
Advertisement
P74414ea_F5U513ea_manual_uk 11-08-2003 12:09 Page 5
1. When Windows has finished loading, the "New Hardware Wizard" will
launch and display a window that identifies the Adapter as a "Texas
Instruments OHCI Compliant IEEE 1394 Host Controller". Click "Next".
2. Select "Search for the Best Driver for Your Device (Recommended)".
Click "Next".
3. Leave all boxes unchecked. Click "Next".
4. The "New Hardware Wizard" will now prompt you to select the driver
you wish to install. Select "The Updated Driver (Recommended)". Click
"Next".
5. The "New Hardware Wizard" will now locate and install the proper
driver. Click "Next".
6. You may be prompted to insert your Windows 98 installation CD.
7. Hardware installation is now complete. Click "Finish".
8. To confirm that the Adapter has been properly installed, open the
Windows "System Properties" window and click the "Device Manager"
tab. In the list of installed devices, click the "+" sign next to the
entry for "IEEE 1394 Bus Controller". You should find an entry for
"Texas Instruments OHCI Compliant IEEE 1394 Host Controller".
WINDOWS 98 SE
DRIVER INSTALLATION
5
En
Advertisement
Table of Contents
