17 - HOW TO CONFIGURATE POSITIVE PERIMETRICAL INPUT.
Enable line 6 page 2 on the basic tables functions following the instructions written on the
reverse side (see paragraph 15 on "How to programme the G100 sytem").
18 - ALARM RECORD.
When it is being disarmed, the system reports if there has been an alarm by four acoustic
and visual signals emitted by the direction indicators and buzzer. Pay attention to the LED
signals that remain available until the next time the system is armed or until the ignition is
turned ON. The signals (number of flashes) identify the cause of the alarm.
59
COMPLETE INSTRUCTIONS G100