Silent Arming - Cobra G100 Complete Instructions

6 - LIST OF STANDARD FUNCTIONS G100 (not programmable).
RADIOCONTROL BUTTON FUNCTIONS.
Button A
This button arms the alarm and blocker system, deactivates
the volumentric input and additional sensors input, activates
the panic option, gives access to the programming function,
selects the line and raises the buzzer volume in the
programming table, and activates the Car Finder option.
Button B
This button deactivates the alarm, block system,
activates / deactivates the function and lowers the
buzzer volume.
6.1 - Arming.
•
When radiocontrol button "A" is pressed, the doors lock (if the
vehicle is equipped with a centralized locking system).
•
The direction lights flash twice.
•
The buzzer emits two acoustic signals (if enabled).
•
The protection functions activate after 25 s.
• The LED lights up and stays on for 25 s, then flashes.

6.2 - Silent arming.

For temporary elimination of the buzzer signal when arming the system, press radiocontrol
button "A" before turning off the ignition.The next time it is armed, the buzzer will start
working again.
COMPLETE INSTRUCTIONS G100
B
A
B
A
B
A
41