Emergency Panel - Cobra G100 Complete Instructions

9.4 - Ultrasonic volumetric sensor (if foreseen).
The sensor heads can be installed on the upper part of the front windshield or back
window side - columns, making sure that they are not covered when the sun - shield
flaps are lowered. Check that the heads are correctly oriented when you perform the
functional test on the system. The type of sensor used in this alarm system does not
require any adjustment. It is suitable for vehicles of all types regardless of the dimensions
of their passenger compartment.
1 2
9.5 - Bonnet button.
The installation of this button is indispensable to protect the bonnet and to allow access
to the alarm programming and Driver Card self-learning procedures.
When installation is completed, check that the button is pressed by the bonnet to the
extent of at least 5 mm. Check that the button does not press on the sound-absorbing
panels or the outer bodywork plate - metal, as these materials could beome dented with
the passing of time.
9.6 - Antenna.
The correct positioning of the antenna is essential for the proper operation of the
radiocontrols. The cable must not be cut, rolled up, or connected to another cable or to the
bodywork and must be kept separate from the wiring harness. Position the antenna so
that it is at least 20 mm away from metal parts.

9.7 - Emergency Panel.

To be installed on the dashboard in a position that also ensures that the button can be
reached and the LED can be seen by the user, as in addition to its deterrent function the
panel (LED + button) is used during programming operations and in the user recognition.
50
COMPLETE INSTRUCTIONS G100