Belkin F5U008-PC Instruction Manual page 6

P73570-F5U008-PC-AM.qxd 6/1/01
Combo Card Installation
7. Reconnect all of your devices and cables to your computer.
However, do not connect anything to the FireWire ports of
your new Belkin FireWire/USB Combo Card. Once this is
done, turn on your computer.
8. When Windows starts, you will see the "Add New
Hardware Wizard". It will detect the IEEE 1394
OHCI-Compliant Host Controller. Click "Next".
9. A window will pop-up giving you a choice of where to look
for drivers for the new device. Select "Display a list of all
the drivers in specific location, so you can select the driver
you want". Click "Next".
10. A list of drivers will appear in a window. Select "NEC
Firewarden OHCI Compliant 1394 Host Controller"
11. A window will now appear stating "Windows driver file
search for the device". Click "Next".
12. Windows may prompt you to insert the Windows CD-ROM.
Please be prepared to insert this CD-ROM into the CD-
ROM drive of you computer. Click "Next".
13. Once the drivers are found and installed, Windows will tell
you it has finished installing the software for the device.
Click "Finish".
14. Next, Windows will detect the presence of the USB PCI
Host Controller that is built into the FireWire/USB Combo
Card. Detection and installation should be automatic. If
not, continue to click "Next" as Windows prompts you as it
progresses and installs the USB Host Controller.
9:30 AM Page 6
(continued)
6
Combo Card Installation
The installation of the PCI card is now complete. You may
now proceed to install the MGI video editing and capture
software. Once the installation is complete, refer to the MGI
documentation provided on the CD-ROM to learn how to
begin capturing and editing video.
For technical suppo
rt, call
800.223.5546. extension 2263.
(US only)
Or visit
belkin.com/support/tech
7
(continued)
En