This means that installing the ExpressCard now assures you of device-upgrade expansion room for many years to come. Please carefully review this User Manual so that you can take full advantage of all the capabilities the Belkin SATA II ExpressCard offers.
Introduction Benefits • Meets PCI Express Base Specification Revision 1.1 • Delivers single-lane (x1) PCI Express throughput support rates of 2.5Gbps • Complies with ExpressCard 54mm-wide module specification • Builds in 2 external, independent Serial ATA ports • Complies with Serial ATA 1.0 specifications •...
Introduction System Requirements • Windows based notebook with available ExpressCard slot ® • Windows 2000, XP, 2003 Server Package Contents • SATA II ExpressCard • User Manual • CD Driver...
Hardware Installation 1. Locate your notebook’s ExpressCard slot(s). 2. With your notebook on, slide the ExpressCard into the unused 54mm ExpressCard bus slot. Note: Do not plug any devices into the ExpressCard until you have completely finished the driver installation. 3.
Verifying Proper Installation Check the “Windows Device Manager” to confirm that your ExpressCard has been properly installed. 1. Right-click on “My Computer” and select “Manage”. 2. Select the “Device Manager” tab. 3. Click the (+) sign next to “SCSI and RAID controllers”. The “SCSI and RAID controllers”...
Troubleshooting The ExpressCard and devices connected to the computer do not work properly. Please do the following: 1. Check that all the cables you are using are the correct types, and that they are all securely connected. 2. Make sure all devices are powered on and connected to the proper power supply and source.
Page 10
Troubleshooting I cannot install the ExpressCard driver. Ensure that your Microsoft Windows operating system is upgraded to the latest “Service Pack” (please check the Microsoft website). It is highly recommended that you update your system to Windows 2000 service pack 4, Windows XP service pack 2, or Windows Server 2003 service pack 1 (or later).
(except for shipping charges for the product). What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin Corporation for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin Corporation determines that the Belkin product has been improperly installed, altered in any way, or tampered with.
Page 12
Belkin Corporation reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin Corporation for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin Corporation, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment.